Can I use the BatteryCharge60 as a power supply?

Yes, the BatteryCharge60 can be used as a power supply by entering Power Supply Mode.

When in Power Supply Mode, the BatteryCharge60 will output 13.6V at 60A.

To use the BatteryCharge60 in Power Supply Mode:

1. Attach the positive (+) red lead of BatteryCharge60 to the load’s positive input.
2. Attach the negative (-) black lead of BatteryCharge60 to the load’s negative input.
3. Connect the BatteryCharge60 to your mains power supply.
4. Press and hold the battery chemistry and charge rate buttons together for 10 seconds or until all indicators light up.

All charge rate LEDs will turn orange. The BatteryCharge60 is now in Power Supply Mode.

To exit Power Supply Mode, press the Charge Rate button once.