Yes, the SmartLink is designed to support an analogue dipper.
To connect an analogue dipper to your SmartLink:
- At the top of the SmartLink, in the red dip switch, move pin 2 to the off position.
- On the bung wiring loom is a single red wire. Connect the analogue dipper's red wire to pin 1 of the SmartLink's water tank sensor connection.
- Connect the white earth wire at the bottom of the tank to pin 5 of the SmartLink's water tank sensor connection.
- Connect the analogue dipper to your water tank as per the analogue dipper's requirements.