The Node in the RVMaster system can pair to a total of four devices, the Controller plus three other smartphones or tablets.
When attempting to pair, if the Node is already paired to four devices, or if other issues prevent pairing to the Node, the Menu Display will show ‘--’.
In this case, to pair the new device, you will first need to clear the Node of all previously paired devices.
Note: Clearing the Node memory will also clear the pairing between the Node and Controller. After clearing, the Controller will need to be paired to the Node again.
To clear the Node of all previously paired devices:
1. Go to the RVMaster App General Settings and press Bluetooth Connection.
2. Press Unpair to unpair the Controller from the Node.
3. Navigate to the ‘PA’ function on the Controller display.
4. Press and hold the EXT button for approximately 10 seconds until the number 1 scrolls across the Controller display. The Node is now cleared of all connected devices.
