How do I set my JControl to work with lithium batteries?

The ability to configure battery chemistry is available only if the JControl is in use with the J35B-L or J35D, which are capable of charging both lead acid and LiFePO4 type batteries.

By default, the J35B-L or J35D are configured to charge lead acid batteries. This can be changed with the JControl monitor.

To configure the J35B-L or J35D to charge LiFePO4 batteries with the JControl monitor:

1. Enter Set-Up mode by holding the SETTINGS button down until Set-Up is seen in the AMPS and VOLTS display.
2. Navigate to the ADVANC menu function.
3. Navigate and select LiFePO4.