Setec Customer Support

Battery volts and amps will flash on the Trek3 if a BC300 + CommLink external shunt has been installed and communication with it has been lost. To re-establish communication, the BC300 will need to...

If you have an OdysseyLink103/104 and your Trek is connected to it, the water tank readers will also need to be connected to the OdysseyLink103/104 for the readings to display on your Trek. Ensure ...

If a connection is lost between the BC300 and the CommLink, or the CommLink is disconnected from the main BP35/J35 System either at the Battery Management System or the Node, a warning will display...

Not all alternators are suitable for direct connection to the BatteryPlus35-US power management system due to output current or voltage. You may require a MiniBoost DC-DC charger to ensure efficien...

Not all alternators are suitable for direct connection to the BatteryPlus35 power management system due to output current or voltage. You may require a MiniBoost DC-DC charger to ensure efficient c...

Not all alternators are suitable for direct connection to the J35 power management system due to output current or voltage. You may require a MiniBoost DC-DC charger to ensure efficient charging: h...

Not all alternators are suitable for direct connection to the ASPower power management system due to output current or voltage. You may require a MiniBoost DC-DC charger to ensure efficient chargin...

The solar card within the ASPower will limit the maximum input to ensure your batteries do not become overcharged. It is safe to have a solar system that can produce slightly more power than the ma...

You will need to configure the Aspero system to forget the external shunt, otherwise it will still behave as if one was connected. To configure the Aspero system to forget an external shunt: On th...

The ASPower features in-built solar regulators. You can connect the positive and negative leads from your an unregulated 12V solar panel directly to the solar input on your ASPower. If you have a r...