Setec Customer Support

The green stamp is on all BMPRO products that are approved and compatible for the use with Lithium LiFePO4 batteries. If this stamp doesn't appear on your BMPRO product, then it won't be Lithium L...

Yes, you can, just ensure the battery system or bank does not exceed 100A peak or 80A continuous draw or charge for BatteryCheck100 and 300A peak (240A continuous) for BatteryCheckPRO. Also please ...

The BatteryCheck is designed for deep cycle batteries (also known as ‘house’ batteries) and as such should not be used on a starter battery.

The J35D and BatteryPlus35-II-HA are capable of charging up to 600Ah of battery capacity.

Consider the following: 1. How much current is the caravan using compared to the current available from the J35 to power loads and charge the battery? If the caravan is using most of the available ...

We do not recommend fitting an inverter to the J35 / BatteryPlus35 battery management systems. The J35 is limited to a total of 20A (J35A, BatteryPlus35-II-SI, BatteryPlus35-II-SR, BP35-PM) o...

All three BatteryPlus35-II models feature in-built solar regulators, so you may connect the positive and negative leads from your an unregulated 12V solar panel directly to the solar input on...

Use either JHub tablet or JHub app (which requires ControlNode102 or later). 1. Press the menu icon in the top left corner of the Home Screen. 2. Select “Settings” from the drop down list. 3. Scrol...

The answer depends on the internal BMS inside your lithium battery. Both BMPRO Zeal and Invicta can be connected in parallel up to four batteries - please refer to the schematic of the installation. 

The BMS in the lithium battery is for the battery protection of low voltage cut out, excess current turn off, over charging protection. It is mainly for preservation, not charge management.For a 10...