Setec Customer Support
- Total activity 764
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 5
- Subscriptions 399
Activity overview
Latest activity by Setec Customer Support-
Setec Customer Support created an article,
I'm updating my OdysseyLink firmware but the progress bar is stuck and not moving. What do I do?
If your OdysseyLink firmware update seems to be stuck, clearing your app data will allow it to complete. To clear your Odyssey app data, follow the instructions in this help guide.
-
Setec Customer Support created an article,
How do I know if my BC25 is an anniversary model and has a 10 year warranty?
BMPRO released the 10 year anniversary battery chargers in their AC-DC Battery Charger range (BC15 & BC25) in late 2024 and they are easily distinguishable with orange end caps instead of the tradi...
-
Setec Customer Support created an article,
How do I know if my BC15 is an anniversary model and has a 10 year warranty?
BMPRO released the 10 year anniversary battery chargers in their AC-DC Battery Charger range (BC15 & BC25) in late 2024 and they are easily distinguishable with orange end caps instead of the tradi...
-
Setec Customer Support created an article,
Can I use the ProBoost with a power management system?
Yes, you can use the ProBoost with a power management system. View our help guide on how the ProBoost can be used to add to a BMPRO power management system here.
-
Setec Customer Support created an article,
What is the Remote Switch (RSW) on the BatteryPlus35-II?
The Remote Switch (RSW) on the BatteryPlus35-II is an optional connection that allows you to disconnect power outputs to preserve battery power. It is a negative (ground) loop switch, meaning it is...
-
Setec Customer Support created an article,
My OdysseyControl tablet is only showing "BMPRO Powered by Android" and I can't access anything. What can I do?
The OdysseyControl is stuck in a boot loop, which normally indicates the tablet's battery is flat. It is either not getting charged via the charge cable connected to it or the battery in the tablet...
-
Setec Customer Support created an article,
My JHub tablet is only showing "BMPRO Powered by Android" and I can't access anything. What can I do?
The JHub tablet is stuck in a boot loop, which normally indicates the tablet's battery is flat. It is either not getting charged via the charge cable connected to it or the battery in the tablet is...
-
Setec Customer Support created an article,
Can I connect any alternator to my BatteryPlus35-US?
Not all alternators are suitable for direct connection to the BatteryPlus35-US power management system due to output current or voltage. You may require a MiniBoost DC-DC charger to ensure efficien...
-
Setec Customer Support created an article,
Can I connect any alternator to my BatteryPlus35?
Not all alternators are suitable for direct connection to the BatteryPlus35 power management system due to output current or voltage. You may require a MiniBoost DC-DC charger to ensure efficient c...
-
Setec Customer Support created an article,
Can I connect any alternator to my J35?
Not all alternators are suitable for direct connection to the J35 power management system due to output current or voltage. You may require a MiniBoost DC-DC charger to ensure efficient charging: h...