Pairing your Controller, smartphone or tablet to the Node is done in three easy steps. The JAYCOMMAND App will guide you through the pairing process.
NOTE: The Controller will have been paired to your Node at the factory. You should only need to pair your own device or smartphone to the Node.
While the Node can be paired to a total of four devices (including the Controller), you can only pair one device at a time to the Node.
- If you are pairing the JAYCOMMAND app on your smartphone or tablet, launch the app.
- Using the < or > buttons on the Controller, navigate to the PA menu item.
- When ‘PA’ appears on the display, press the EXT button to start the pairing process to the Node. ‘PA’ will blink for a maximum of 30 seconds or until a device is connected.
When pairing is successful, you will be taken to the app home screen and the Bluetooth icon will be visible.
You are now connected.
If you cannot pair to the Node, follow our troubleshooting tips here.
If the Controller becomes stuck on the pairing screen, follow our guide here.