Skip to main content

How do I replace a SmartTemp sensor's batteries?

Setec Customer Support
  1. Using a small screwdriver, lift the lid from the recess side.

SmartTemp-battery-replacement-1-300x149.png

 

  1. Carefully lift the board with the electronics. Replace the CR2477 battery.

SmartTemp-battery-replacement-2.png

 

  1. Align the groove in the PCB with two pieces of plastic.

SmartTemp-battery-replacement-3.png

 

  1. Align the button on the PCB with the button on the base of the sensor Press the base down until it is locked.

SmartTemp-battery-replacement-4-300x144.png

Related articles