Setec Customer Support
- Total activity 820
- Last activity
- Member since
- Following 0 users
- Followed by 4 users
- Votes 6
- Subscriptions 424
Activity overview
Latest activity by Setec Customer Support-
Setec Customer Support created an article,
Can the PowerCore3K100 be used with a solar power system?
Yes, the PowerCore3K100 can be used with alongside a solar power system, but will require additional components such as a solar charge controller for compatibility, such as BMPRO's BatteryPlus35-II...
-
Setec Customer Support created an article,
What charging current should I set on the PowerCore3K100?
The PowerCore3K100 has a maximum charging current of 100A but is settable down to 25A. You should consult your battery manufacturer's specifications to determine a suitable charging current for you...
-
Setec Customer Support created an article,
How do I change the Battery Type setting on the PowerCore3K100?
The default battery type setting on the PowerCore3K100 is for gel batteries. If you are using a different kind of battery, you must change the battery type setting. To change the battery type: On ...
-
Setec Customer Support created an article,
The charger on the PowerCore3K100 is not providing charging current. What can I do?
There could be a few reasons why there is no charging current from the PowerCore3K100: The charger may be turned off. Check the charger function in unit settings on the remote control display and ...
-
Setec Customer Support created an article,
There is no AC output at the AC output socket on my PowerCore3K100. What should I do?
There could be a few reasons why there is no AC output from the PowerCore3K100: Check if the thermal breaker on the unit is tripped. If so, reset the thermal breaker. AC input source is available ...
-
Setec Customer Support created an article,
What household appliances can I power with the PowerCore3K100?
The PowerCore3K100 provides 3000W continuous output and 6000W surge capacity, making it suitable for many household appliances such as microwaves, kettles, power tools, and TVs. However, the total ...
-
Setec Customer Support created an article,
If I replace my lead-acid batteries with lithium batteries, what compatibility do I need to consider to ensure my system runs correctly?
Lead-acid and lithium batteries have distinct characteristics, requiring different charging methods and state-of-charge algorithms to ensure accurate monitoring and optimal performance.Some lithium...
-
Setec Customer Support created an article,
What does UPS mean on the PurePro display when it is powered from AC?
If the PurePro display shows “UPS,” it indicates that the unit is functioning as an Uninterruptible Power Supply (UPS). This means it provides backup power if the connected AC mains power source fa...
-
Setec Customer Support created an article,
Can I replace the cable between the XShunt500 and the PXGateway?
No, you cannot. The 2.5m data cable between XShunt500 and the PXGateway is a fixed length and cannot be changed, as this is required for data to be sent properly.
-
Setec Customer Support created an article,
What should I do if the PXShunt500 is not transmitting data?
The state of charge calculation in a BMPRO power management systems uses a learning algorithm to provide accurate data. It can take 3 charge and discharge cycles after either the initial installati...