How do I set the clock on my JControl?

The time on the JControl may be set in either 12- or 24-hour formats.

12-Hour Format

1. Enter Set-Up mode by holding the SETTINGS button down until Set-Up is seen in the AMPS and VOLTS display.
2. Navigate to the CLOCK menu function.
3. Follow the directions in the below image to set the clock in 12-hour format:

The AM and PM indicators will automatically change as the hour changes from 11 to 12.

24-Hour Format

1. Enter Set-Up mode by holding the SETTINGS button down until Set-Up is seen in the AMPS and VOLTS display.
2. Navigate to the CLOCK menu function.
3. Follow the directions in the below image to set the clock in 24-hour format: