The LED flash codes on the ControlNode indicate the operational/pairing status of the ControlNode.
| Operational Status | Flashing Status | Notes |
| ControlNode is ready to pair |
Green 30 seconds |
|
| ControlNode memory is full, cannot pair to any new mobile devices |
Orange 1 second |
To pair to a new mobile device, clear the memory of the ControlNode. |
| Clearing ControlNode memory |
Red 1 second |
Once memory has been cleared, the ControlNode LED status indicator will immediately flash green, letting you know that you can now pair to a new mobile device. |
Comments
0 comments
Please sign in to leave a comment.