Why does my PurePro have no output?

If the PurePro has no output, check the following:

• The battery voltage is too low. Recharge or replace the battery.
• The load current is too high, and part of the load is turned off to restart the inverter. Reduce the load current into the PurePro.
• The PurePro is overheated and is undergoing thermal protection. Allow the PurePro to cool for a while and place it in a well-ventilated area.
• The terminals are reversed. Connect the positives and negatives to the correct DC terminals.
• The RCD has detected earth leakage and has disconnected the loads.